5052 aluminium contains magnesium as the primary alloying element. It is a non-heat treatable alloy that offers good workability and weldability, medium to high fatigue strength and very good corrosion resistance, particularly in seawater. 5052 aluminium alloy is commonly used in sheet, plate and tube form.
Typical applications are architecture, general sheet metal work, heat exchangers, fencing, pressure vessels, marine components, containers, appliances, kitchen cabinets, etc.
5052 aluminium alloy can be easily machined in hard temper and formed at room temperature. However, consecutive cold working tends to reduce the alloy’s formability. Aluminium 5052 alloy can be hardened by cold working only. Aluminium 5052 alloy can be forged from 510°C (950°F) down to 260°C (500°F) and hot worked easily from 510°C (950°F) down to 260°C (500°F).
5052 aluminium can be annealed at 343°C (650°F) and then air cooled When annealed, 5052 alloy is stronger than 1100 & 3003.
Typical Physical Properties of 5052 Aluminium Alloy | Metric | Imperial |
---|---|---|
Density | 2.68 g/cm3 | 0.0968 lb/in� |
Typical Mechanical Properties of 5052 Aluminium Alloy | Metric | Imperial |
---|---|---|
Elastic modulus | 70-80 Gpa | 10152-11603 ksi |
Poisson�s ratio | 0.33 | 0.33 |
Chemical composition of 5052 Aluminium Alloy | |
---|---|
Al | 97.20% |
Mg | 2.50% |
Cr | 0.25% |
Thermal Properties of 5052 Aluminium Alloy | T(�C) | Treatment | |
---|---|---|---|
Thermal conductivity | 137 W/mK | 25 | H38 |
Thermal expansion | 23.8 x 10-6/�C | 20-100 | - |
Alloy Designation | US | US Federal | European | UK | Other |
---|---|---|---|---|---|
5052 | AMS 4004 5052 Strain Hardened Foil� | QQ-A-225/7 5052 Cold finished bar | |||
5052 | AMS 4015 5052-T0 Sheet, Plate and Foil | QQ-A-250/8 5052-0 Sheet and plate | |||
5052 | AMS 4016 5052-H32 Sheet, Plate and Foil | QQ-A-250/8 5052-H32 Sheet and plate | |||
5052 | AMS 4017 5052-H34 Sheet, Plate and Foil | QQ-A-250/8 5052-H34 Sheet and plate | |||
5052 | AMS 4069 5052-0 Tube Drawn Seamless Close Tols | WW-T-700/4 5052 Seamless tube | |||
5052 | AMS 4070 5052-0 Tube Drawn Seamless | ||||
5052 | AMS 4071 5052-0 Tube Drawn Seamless Hydraulic� | ||||
5052 | AMS 4114 5052-TF Bar, Rod Rolled or Cold Finish | ||||
5052 | AMS 4175 5052 Honeycomb Core (use AMS 4348) | ||||
5052 | AMS 4348 5052 Core Honeycomb | ||||
5052 | AMS 4056 5083-0 Sheet and Plate |